· Trowel the mud onto the paneling with an 8- to 10-inch drywall blade, work it into the cracks and scrape off the excess. Don't try to level the paneling with hot mud. Just use it to fill cracks.
· First wood and wood paneling contracts and expands more than drywall gypsum panels, which will over time result in cracked joints. Taping joints does help with this problem to some extent, but in most cases fails, especially in areas of frequent temperature changes.
· Drywall compound will stick very well to wood paneling please resist the urge to get "creative" with the texture . Wallpaper, less so, and even if it sticks well, if the wallpaper ever started peeling off, it would take the top part of the wall with it.
2 · Start in one of the top corners, applying dilute all-purpose joint compound on the wall with a paint roller or drywall knife and scraping the knife along the grain of the wood to flatten the mud.
· To give solid wood paneling a new look, either lightly sand and paint the wood or remove the boards and replace with drywall. If the paneling is knotty pine, be sure to use a stain blocking, oil or shellac based primer to help prevent the resin in the wood from bleeding through the paint.
· Is drywall the only wall covering? Despite its origin as an easier material to work with than plaster and lath, it still requires a deft, artistic hand to get right, especially in the finishing stages. Sanding drywall mud is one of the most dreaded jobs in interior home remodeling due to the clouds
Many suggest using drywall mud over the grooves between the panels, sanding the paneling, applying primer, then painting. Ask Your Question. I finally decided on a method for covering up the wood paneling and bought all the materials last night. After extensive research on products, I decided to go with Zinsser brand primer and paint.
Ask Your Question Angie's List Answers is the trusted spot to ask home improvement and health questions and get answers from service companies, health providers and consumers. For ratings and reviews on companies in your area, search Angie's List.
How to Cover Up Wood Paneling. More in: interior, Painting, Paneling, And think about all the trouble you saved yourself from not doing the other things which are a lot more work, like covering the paneling with drywall or things of that nature or taking the paneling down.
· Plan on covering the entire wall in at least 3 layers of mud. After the caulk is dry, begin coating the wall in mud with an 8 or 10-inch drywall knife. Hold the knife at about a 45-degree angle, and scrape it over the surface of the wall.
Removing paneling can be a time-consuming and costly so many homeowners opt to drywall over the paneling. Installing drywall over paneling is a workable solution if it is done properly. Drywall can be installed over wood paneling that is in good condition.
Can drywall mud be applied on wood hunker furniture back doors mud rooms geous ideas to cover paneling 9 how to paint paneling today s homeowner to hang drywall
Next, use a little drywall mud also known as a joint compound to fill in the grooves of the wood paneling. This is the same joint compound used to finish drywall. This is the same joint compound used to finish drywall.
· Consider alternatives such as painting wood paneling or filling in the seams with spackle. If you still want drywall, adjustments to the jambs should be made after the drywall is installed Putting drywall over thin wood paneling may cause the new wall to jut beyond door and window jambs.
· Drywall mud will easily stick to the wood panel, but the mud will allow the grain to show through. This makes primer important. The primer you should use needs to be formulated with wood paneling in mind and will usually cost around $25 per gallon.